Each channel has two digital inputs labelled A and B. Controls
for each input include:
Gain Trim
Phase Reverse
Delay
Input Select (A, B, or A+B)
Patching Input Sources (PatchNet)
The PatchNet routing system (see page 28) is used to patch
sources to inputs. Any sources within the system, such
as mix-minus/group outputs or externals may be sent to
these inputs.
External MADI inputs can also be directly patched. For Analog,
AES/EBU and other digital sources the Euphonix converters
are used. See the Converter section for details (page 32)
.
Mic/Line Preamp For variable gain analog mic inputs Euphonix provides the
ML 530 with 24 mic/line input preamps and the AM713 analog
to digital converter. If this is connected to the system
the controls for phantom power, input impedance, high pass
filter and gain are available on the channel strip.
This can also act as a direct box, providing correct impedance
matching with balanced outputs plus the benefit of gain control.
For variable gain analog mic inputs Euphonix provides the
ML 530 with 24 mic/line input preamps and the AM713 analog
to digital converter. If this is connected to the system
the controls for phantom power, input impedance, high pass
filter and gain are available on the channel strip. 
